Welcome to Suzhou Xinrongfa Metal Products Co., Ltd.
CN EN

Adhering to quality is the life of an enterprise

Coating spraying of Teflon, tungsten carbide and alumina

Service hotline:

15995489385

+ Wechat number:wechat number

Your location: Home > Information dynamics > Industry dynamics

Recommended products

National Service Hotline

15995489385

3mm Thick PTFE Sheets for Agitator Lining | Chemical Mixing Equipment Maintenance

Source:www.xinrongfa.cn      Release date: 2026年11月11日
Information summary:During chemical reaction processes, agitator impellers are permanently immersed in various corrosive media and continuously subjected to liquid erosion, material friction and temperature fluctuations. Agitator components with metallic substrates are prone to corrosion and perforation in acidic, alkaline and strongly oxidizing environments.

      During chemical reaction processes, agitator impellers are permanently immersed in various corrosive media and continuously subjected to liquid erosion, material friction and temperature fluctuations. Agitator components with metallic substrates are prone to corrosion and perforation in acidic, alkaline and strongly oxidizing environments. Unplanned shutdowns for equipment maintenance disrupt the operation of the entire production line. Lining agitators with 3mm thick PTFE sheets forms a barrier protection layer on the metal substrate via sheet lining technology. It isolates direct contact between media and the substrate to protect against various component wear risks encountered during chemical mixing equipment maintenance, and is suitable for maintenance and retrofitting projects of mixing equipment under diverse corrosive working conditions.

      For mixing scenarios in strong acid and strong alkali reaction systems, the lining reduces component loss caused by chemical corrosion. Many synthesis processes adopt highly active acidic and alkaline media. Ordinary metal impellers suffer pitting corrosion gradually after long-term immersion; expanding pits may penetrate the substrate and lead to component failure. The 3mm PTFE sheets feature stable chemical properties and block all kinds of acid and alkali media from contacting the internal metal base to mitigate substrate erosion. The sheets are bonded onto impellers and agitator shafts by sheet lining technology, covering all material-contact areas to prevent exposed unprotected metal spots. This extends the service life of mixing components and cuts part replacement frequency.

      For slurry mixing conditions containing solid particles, this lining solution mitigates wear caused by medium erosion. Solid particles inside slurries continuously strike and rub against impeller surfaces during rotation, wearing down component surfaces after long operation. The 3mm PTFE sheets offer good erosion resistance. Compared with thin coatings, they provide thicker protection margin and slow down the penetration of protective layers under continuous particle friction. The sheet surface has a low friction coefficient, which prevents material buildup and scaling on impellers, avoids local stress concentration induced by scale deposits, and lowers the risk of surface damage on impellers.

      In batch production with frequent material changeovers, the lining reduces indirect wear triggered by cross-contamination. When factories switch between materials of different formulas, residual substances adhere to mixing components. Some mixed media generate corrosive byproducts that continuously attack the substrate. PTFE sheets have anti-sticking surfaces, so residual materials can be removed easily during cleaning. It reduces residue from different batches and prevents localized corrosion caused by long-term adhesion of leftover media. Simplified cleaning workflows reduce repeated scouring of agitators by strong cleaning agents and minimize damage to agitators during cleaning.

For reaction conditions with alternating temperatures, the lining structure resists component damage induced by temperature variation. Some synthetic reactions involve heating and cooling cycles. Metal substrates deform under temperature change, and thin protective coatings tend to crack and peel off. 3mm PTFE sheets fit the temperature range of conventional chemical reactions. The sheets have stable deformation characteristics. After composite bonding with substrates, the lining remains intact under cyclic temperature changes, reducing peeling and delamination. It continuously protects the internal metal substrate and prevents rapid substrate corrosion once the lining falls off.

      In major equipment overhaul and retrofitting projects, old impellers can be directly treated with sheet lining instead of full agitator replacement. After polishing the original metal impellers, 3mm PTFE sheets can be bonded for anti-corrosion upgrading, shortening retrofitting duration and lowering component replacement costs. Sheets can be cut and shaped according to impeller profiles, and lining construction is available for multiple agitator types including anchor, paddle and frame agitators.

      During maintenance planning for mixing equipment, chemical enterprises can carry out PTFE sheet lining retrofitting for reactor agitator components. The 3mm sheets create a stable isolating protective layer to reduce component wear caused by corrosion, erosion and scaling, extend the maintenance cycle of mixing parts, and sustain stable operation of reaction processes.